USB Wireless Repeater Signal Booster AP Access Point Bridge WiFi Range Extender

Dimension: 28*7.8*19mm
LED:3(Blue,Yellow,Red)
Button: reset button
Interface: 1*USB port
Input:5V
Power Consumption: about 2.25W
Antenna: 1 * internal
Frequency: 2.4Ghz
Standards and protocols: IEEE 802.11n,IEEE 802.11g,IEEE 802.11b
Singal rate 2.4Ghz: up to 150Mpbs
Transmit power:<20 dBM(EIRP)
Wireless security: WPA-PSK/WPA2-PSK
Operating temperature: 0-40 DegC
Storage temperature: -40-70 DegC
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Indicator light:
When the indicator light is blue,it means that the current position is moderate and the signal is good.
When the indicator light is yellow,it means the WIFI+ is too close to the router.
When the indicator light is red,it indicates that it is too far from the router, the position is not suitable as an extension point.
How to get the amplifier to restore factory setting?
In the condition of electricity and hold the Reset button for about 6 seconds, loosen the button, the blue light is put out and on again, flashing, amplifier will restore to factory Setting.
Package include:
1 x WIFI Range Extender