110V Solar Circuit Pump Heater Boiler Controller Separated Pressurized Hot Water
Introduction:
The solar circuit pump (R1) is switched on as soon asthe switch-on temperature difference between the collector array (T1) and the storage tank (T2) is reached.If the temperature difference between the collector array (T1) and storage tank(T2) drops below the switch-off temperature difference, or the temperature ofstorage tank (T3) reaches the preset maximum storage temperature, then thesolar circuit pump (R1) is switched off. Back-up heating by auxiliary boilerWithin the preset time section of back-up heating, if the temperature T3 is below the switch-on temperature, then the circulation pump ( H1) of back-upheating is triggered, when T3 is heated to the switch-off temperature,circulation pump H1 of back-up heating is ceased.
Technical data
Appearance of controller: 187mm x 128mm x 46mm
Power supply: AC110V +/- 10%
Power consumption: < 3W
Accuracy of temperature measuring:+/- 2 Cel. degree
Range of collector temperature measuring: -10 -220 Cel. degree
Range of tank temperature measuring: 0-110 Cel. degree
Suitable power of pump: 3 pcs < 600W
Inputs: 1 x Pt1000 sensor (<500 Cel. degree) for collector (silicon cable<280Cel. degree),
2 x NTC10K, B3950 sensor (< 135Cel. degree) for tank, (PVC cable <105Cel. degree),
Outputs: 1 relays, for circulation pumps
1 relay for electrical heater
Ambient temperature: -10 - 50 Cel. degree
Main functions
1.Main menu DT O & DT F Temperature difference function
2.Main menu-THET timing heating
3.TEMP Temperature main menu
4.EM Emergency collector temperature (emergency switch-off temperature of collector)
5.CMX Maximum limited collector temperature (collector cooling function)
6.CMN low temperature protection of collector
7.CFR frost protection of collector
8.SMX Maximum temperature of tank
9.REC Tank re-cooling function
10.Celsius and Fahrenheit temperature transferring
11.HND Manual mode
12.PASS Password setting
13.LOAD Recovery to factory setting
14.Manual heating
15.Temperature query function
16.Protection function
18.Anti-dry heating Protection
19.Screen protection
Application:
It is for the solar hot water heating system: 1 collector array ¡V 1storage tank ¡V 1 pump and auxiliary heating.
Package:
Controller for solar water heater 110V x 1 set
Manual in English